ECS Tuning Billet Aluminum Oil Filter Housing With Removal Tool - Black Anodized

Replace your stock fragile plastic oil filter housing with a durable 6061-T6 billet aluminum with a anodized black finish housing from ECS Tuning. Far stronger than the original, the ECS filter housing requires no special tool to open the drain plug during an oil change, all you need is a common 8 mm Allen wrench. For added convenience, the housing plug sealing ring is identical to the one on the crankcase drain plug, making it easy to source and install new seals for a leak-free job. This kit includes the 36 mm socket needed to unscrew the housing from the engine Remove the old filter, and install a new one. Replace the rubber housing oil ring with the new o-ring contained in the filter kit. Screw the housing/filter on to the engine, and torque to 18 foot pounds. Reinstall the drain plug with new copper ring, and tighten 22 foot pounds. Add engine oil. That's it. No more cracked housings. No more oil spills on your garage floor. No need for a special drain plug tool. No more plastic drain plugs mangled by adjustable pliers. Talk about a no-brainer. *Fits both 2.0t FSI & 2.5 5cyl engines ** PLEASE NOTE: ECS Tuning recommends the use of a quality, OEM-style O-ring for proper sealing (recommended filters are Genuine OEM, Mann and Hengst). Failure to use an OEM style gasket WILL result in oil leaking.