APR Braided Stainless Steel Brake Lines (Set of 2) - Rear

APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need! Cr3+ steel connectors featuring an attractive polished finish Stronger than the factory lines to better resist failure Less expansion than stock for a firmer pedal feel with less pedal travel Braided 304 stainless steel lines and connectors with a smooth-bore polytetrafluoroethylene (PTFE) / Teflon core High quality copper crush washers All necessary hardware and included Average expansion of only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi Tested and meets FMVSS106 and SAE J1401 standards Each unit tested to 3,000 PSI, which is far beyond typical operating pressures Application specific lengths connectors which resist leaks better than adapters Compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids Direct-fit plug-and-play upgrade DOT-compliant Made in the USA Attractive polyvinyl chloride (PVC) outer jacket in smoked clear with red inserts and polished connectors Independently lab certified as SAE “low-expansion” lines

VEHICLE FITMENT

2006-2013 Audi A3 Quattro Base (Liter: 3.2, 2.0 & Engine(ci): 195, 121 & Cylinder: 6, 4 & Block: V, L) 2006-2013 Audi A3 Base TDI (Liter: 2.0 & Engine(ci): 121, 120 & Cylinder: 4 & Block: L) 2012-2013 Volkswagen Golf R Base (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2007-2016 Volkswagen Eos 3.2 2.0T Base Komfort Lux VR6 Turbo Executive Sport Final Edition (Liter: 3.2, 2.0 & Engine(ci): 195, 121 & Cylinder: 6, 4 & Block: V, L) 2008 Volkswagen R32 Base (Liter: 3.2 & Engine(ci): 195 & Cylinder: 6 & Block: V) 2006-2014 Volkswagen GTI Base Fahrenheit Driver's Edition Wolfsburg Edition (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2009-2017 Volkswagen CC Sport VR6 4Motion Luxury VR6 VR6 Sport R-Line Lux Executive Lux Limited Lux Plus VR6 4Motion Executive Sport Plus 4 Motion Executive 4 Motion R-Line Executive V6 Executive 4Motion Trend (Liter: 2.0, 3.6 & Engine(ci): 121, 219 & Cylinder: 4, 6 & Block: L, V) 2012-2019 Volkswagen Beetle Base Turbo TDI R-Line GSR Fleet Edition Classic SEL S SE R-Line SEL Dune Wolfsburg Edition Denim R-Line S R-Line SE #PinkBeetle Coast Final Edition SE Final Edition SEL (Liter: 2.5, 2.0, 1.8 & Engine(ci): 151, 121, 120, 110 & Cylinder: 5, 4 & Block: L) 2006-2009 Volkswagen Rabbit 2.5 S (Liter: 2.5 & Engine(ci): 151 & Cylinder: 5 & Block: L) 2005-2018 Volkswagen Jetta 2.5 GLI 2.0T Value Edition TDI Wolfsburg Edition SE S SEL TDI Cup Edition Base TDI Premium Hybrid SE Hybrid Hybrid SEL Hybrid SEL Premium Sport GLI SEL GLI SE TDI SEL TDI SE TDI S SEL Premium SE Sport (Liter: 2.5, 2.0, 1.9, 1.4, 1.8 & Engine(ci): 151, 121, 116, 120, 85, 110 & Cylinder: 5, 4 & Block: L) 2010-2014 Volkswagen Golf Base TDI (Liter: 2.5, 2.0 & Engine(ci): 151, 120 & Cylinder: 5, 4 & Block: L) 2006-2013 Volkswagen Passat 3.6 Value Edition 2.0T Wolfsburg Edition Komfort Lux Turbo VR6 TDI SEL SE TDI SE S SEL Premium SEL (Liter: 3.6, 2.0, 2.5 & Engine(ci): 219, 121, 120, 151 & Cylinder: 6, 4, 5 & Block: V, L)