APR Braided Stainless Steel Brake Lines (Set of 2) - Rear

APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need! Tested and meets FMVSS106 and SAE J1401 standards Compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids Application specific lengths connectors which resist leaks better than adapters Direct-fit plug-and-play upgrade Made in the USA Stronger than the factory lines to better resist failure DOT-compliant Independently lab certified as SAE “low-expansion” lines Cr3+ steel connectors featuring an attractive polished finish Less expansion than stock for a firmer pedal feel with less pedal travel Attractive polyvinyl chloride (PVC) outer jacket in smoked clear with red inserts and polished connectors Average expansion of only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi Braided 304 stainless steel lines and connectors with a smooth-bore polytetrafluoroethylene (PTFE) / Teflon core High quality copper crush washers All necessary hardware and included Each unit tested to 3,000 PSI, which is far beyond typical operating pressures

VEHICLE FITMENT

2015-2019 Volkswagen Golf SportWagen S SE SEL TDI S TDI SE TDI SEL Limited Edition (Liter: 1.8, 2.0, 1.4 & Engine(ci): 110, 120, 85 & Cylinder: 4 & Block: L) 2017-2019 Volkswagen Golf Alltrack SE SEL S (Liter: 1.8 & Engine(ci): 110 & Cylinder: 4 & Block: L) 2017-2018 Volkswagen Tiguan Limited Base (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2009-2017 Volkswagen Tiguan SEL S SE Wolfsburg Edition R-Line Sport (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2015-2023 Volkswagen GTI SE Autobahn S Sport Rabbit Edition (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2019-2023 Volkswagen Jetta S SE SEL SEL Premium R-Line Sport GLI Autobahn (Liter: 1.4, 1.5, 2.0 & Engine(ci): 85, 91, 121 & Cylinder: 4 & Block: L) 2015-2021 Volkswagen Golf S SE SEL TDI SE Launch Edition TDI S TDI SEL Base Wolfsburg Edition TSi (Liter: 1.8, 2.0, 1.4 & Engine(ci): 110, 120, 85 & Cylinder: 4 & Block: L) 2012-2022 Volkswagen Passat SEL Premium TDI SE SE S TDI SEL SEL Wolfsburg Edition TDI SEL Premium Sport Limited Edition R-Line GT SE R-Line (Liter: 3.6, 2.0, 2.5, 1.8 & Engine(ci): 219, 120, 151, 110, 121, 220 & Cylinder: 6, 4, 5 & Block: V, L)