ECS Tuning Audi C7/C7.5 S6 Air To Air Intercooler Kit

The ECS Tuning Air to Air Intercooler Kit was designed and engineered in-house to provide you with a direct bolt-on system to improve consistency in engine performance, decrease intake air temperature, increase resistance to heat soak, and drastically lower intake air temps! The R&D team at ECS Tuning has spent countless hours creating and testing a system to optimize performance and efficiency while providing the clean look that Audi owners have come to expect. We designed the air to air cooling system to directly mate with the existing OEM piping resulting in an OEM fit but with a custom fabricated appearance.

The C7 / C7.5 4.0T EA824 is named the "hot V" for good reason. While the twin turbo V8 came with impressive power from the factory once you throw some bolt ons and software at it the EA824 becomes a true monster capable of over 700HP+ to the wheels. The turbos located on top of the engine create extreme amounts of heat especially once you upgrade them to larger units. The factory air to water system simply doesn't cut it when trying to squeeze all of the performance potential the EA824 4.0T has to offer. The factory air to water intercooler is not only small and inefficient but also located directly in front of the turbos and subject to excessive heat soak, so bad in fact that there have been cases of it melting under extreme conditions.

With this kit you ditch the factory Air to Water setup for an Air to Air design that drastically decreases intake air temps and keeps them down pull after pull. Instead of hot coolant being circulated though the air to water cooler in the engine bay you get a front mounted intercooler, FMIC, that is constantly getting cooled by air flow though the grill and is completely isolated from the engine compartment making it more resistant to heat soak. If you have upgraded your EA824 4.0T you have encountered heat soak at one point or another due to factory air to water system being undersized for higher power outputs. The 4.0T cooling system needs all of the help it can get and by removing the mostly plastic factory air to water system you reduce the amount of strain on the cooling system and one less weak link.

The Engineering team at ECS Tuning has spent countless hours in the development of the C7 / C7.5 S6 Air To Air Intercooler Kit. This Air To Air kit is a culmination of almost 3 years of research and development, multiple rounds of prototypes and revisions, rigorous real world testing, and verified the performance gains on our in-house chassis dyno. The end result of all of this effort is a charge air cooler that combines unrivaled beauty, fitment, quality and performance in one stunning package that will make a statement on your C7 / C7.5 S6.

For more information about our Air to Air Intercooler Kit, check out this Product Highlight featured on the ECS Tuning YouTube channel!

Features:

• Key benefits:

  • Eliminates heat soak

  • Reduces IATs, decreases pulled timing and maintains target boost pressures for consistent peak performance

  • Eliminates the undersized and inefficient factory air to water intercooler

  • Reduces strain on the cooling system by eliminating the factory Air to Water system.

• Design:

  • 280 in^2 frontal intercooler area compared to the stock ~50 in^2

  • 3.5” thick bar and plate core

  • 900 in^3 core volume

  • Single-pass intercooler

  • Large volume cast end tanks to slow charge air velocity down

  • Aluminum sheet metal fan shroud to maximize space between the front of the motor and fans

  • Upper and lower polyurethane radiator mounts to drop the heat exchanger assembly

  • Retains all emissions and PCV related components

  • Utilizes factory mounting locations and 4 rivet nuts in the crash beam

  • Requires mild trimming of the plastic core support (two mounting posts for un-usable shrouds)

  • Simplifies turbo service and provides access to components in the engine valley (no more service mode for PCV, turbo servicing and oil screen service)

  • Intercooler mounting is isolated from engine movement through silicone couplers

  • Wire reinforced silicone couplers to withstand boost and vacuum pressures

  • Included plug-and-play post intercooler MAP extension harness

  • Fabricated 2.25” aluminum charge pipes with a brushed finish

  • Powder-coated and anodized components with stainless steel hardware for corrosion resistance

  • Does not require any trimming of the crash beam for S6 models

Note: Will not fit S7 models due to interference with the factory crash beam.

* No ports for meth or port injection.

**IAT graph data collected through DS1 datalogs