ECS Tuning Wheel Stud Conversion Kit - Full Set

Make changing out your wheels faster and easier with a stud conversion. This kit includes:

• Conical Seat Lug Nuts (20)
• M14x1.5x82 (62mm from hub) Wheel Studs (20)

This gives you permanent wheel hangers and saving you time and less hassle! Simply screw in the supplied studs and you are in business.

Why use wheel studs instead of wheel bolts?

• Some racing entities require wheel studs for the added confidence of wheel-to-hub contact.
• In order to run spacers with wheel bolts, custom lengths are required for different spacer widths. Wheel studs are designed to accommodate various spacer widths all in one application.
• Installing wheels also becomes easier. The wheel studs will act as a wheel hanger, while the nuts secure the wheel in place.
• Wheel studs stay in the hub, which means you are no longer constantly removing and installing your wheel bolts. The benefit? Less wear on your wheel hubs, meaning less premature wear.
• Since your wheel studs remain in the hub, it also means changing/removing tires becomes incredibly quick and easy.

*Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 20mm.

**Please note: The threaded end going into the hub is 15mm long. Be sure to measure for clearance behind the hub to make sure there is no interference.