Turner Front Fixed Camber Plates - Street/Track

From the factory, most BMWs are dialed-in with less-than-ideal front camber to encourage understeer. This adversely affects handling and tire-wear by putting less of the tire's contact patch on the ground. The solution: add more negative camber. 

By adding negative camber to the front of your E46, you will improve turn-in, handling confidence, and reduce tire wear. These fixed camber plates were designed with knowledge Turner Motorsport gained through their highly successful participation in the Speed World Challenge series.  Offset for the best camber and caster combination when using stock-diameter sized springs, camber increases to between -2.5* to -3.0*, and caster remains stock(<1* of change), depending on the individual vehicle. Utilizing the factory upper strut mount, these camber plates add a minuscule 1/4" of ride height, while also increasing the strength of the strut tower by more evenly distributing the load. Ideal for use in racing classes where adjustable camber plates are not permitted, Turner Motorsport Fixed Camber plates are also an ideal option for anyone not needing the expense of full adjustability, but instead looking to add a little negative camber.