Turner Motorsport Front Fixed Camber Plates

Most BMWs come off the production line with less-than-ideal front camber to encourage understeer. This adversely affects handling and tire-wear by putting less of the tire's contact patch on the ground. The solution: add more negative camber. Turner Motorsport provides an ideal solution to easily add 2.5 negative degrees of camber to your E90, E92, or E93.

By adding negative camber to the front of your rear wheel drive E9x BMW, you will improve turn-in, handling confidence, and reduce tire wear. These fixed camber plates were designed with knowledge Turner Motorsport gained through their highly successful participation in the Speed World Challenge series. Offset for the best camber and caster combination when using stock-diameter sized springs, camber increases to -2.5°, depending on your vehicle's other suspension modifications. Utilizing the factory upper strut mount, these camber plates add an almost negligible 6mm of ride height. Ideal for use in racing classes where adjustable camber plates are not permitted, Turner Motorsport Fixed Camber plates are also an ideal option for anyone not needing the expense of full adjustability, but instead looking to easily add a little negative camber.

Installation is simple, utilizing the OEM upper strut mount - requires pressing out OEM studs and alignment pin. See installation PDF for detailed instructions.