No Products in the Cart
The 034Motorsport 375x34mm 2-Piece Floating Front Brake Rotor Upgrade for MK8 Golf R & Audi 8Y S3 is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory front calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!
Weighing in at approximately 26.0lbs, each rotor reduces rotational weight by 1.3lbs on each corner over the factory 27.3lb rotors and increases rotor diameter from 357mm to 375mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.
The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The 034Motorsport 2-Piece Floating Front Brake Rotor Upgrade Kit utilizes 72 directionally curved vanes properly oriented for each side of the vehicle to forcefully flow cool air through both rotors to dissipate heat equally.
The face of the rotor utilizes J-Slot slots to clean the pad surface of contaminants and allows hot pad outgassing.
The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.
034Motorsport conducted 14 consecutive 60mph-0mph braking events and measured the temperatures of all four brake rotors. From the factory, the same rotor is used on both sides of the S3 & Golf R, leading to one side having incorrect venting and cooling effects, leading to up to an 80°f temperature differential between left and right rotor.
After installing the 034Motorsport Upgraded 2-Piece Brake Rotors, both left & right rotors increase in heat more evenly throughout all 14 consecutive braking events. By increasing thermal mass and improving the cooling, the 034Motorsport 2-Piece Brake Rotors stay nearly 140°f cooler than the factory rotors in similar testing conditions with the same brake pads.
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
