No Products in the Cart
The 034Motorsport 370mmx24mm 2-Piece Floating Rear Brake Rotor Upgrade Kit for the BMW F8x M2/M3/M4 is a complete replacement brake rotor kit, designed to work flawlessly with the factory rear calipers found on the BMW F8x M2/M3/M4.
Weighing in at approximately 20.6lbs, our lightweight design retains proper thermal mass in the rings to adequately capture heat, while utilizing 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat.
The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form allowing hard street use and long days at the track allowing you to drive versus working on the car. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat, and improvement over the cooling of the factory rotor
The face of the rotor utilizes J-Slot slots to clean the pad and surface of contaminants and allows hot pad outgassing, all while reducing overall braking noise compared to a traditional slotted rotor.
The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.
FEATURES:
Lightweight Construction (20.6lb 034Motorsport Rotor), the Same Weight as OEM but With Improved Cooling and Metallurgy
Floating Bobbins, 2-Piece Design with radial and Lateral Expansion Capability, OE Only Allows Radial Expansion
Aerospace Grade Aluminum Hats
CM-250 Special Alloy Rotor Rings Designed Specifically for Hard Street and Track Use, OE Replacement Rotors Can Warm Under These Conditions
J-slotted Friction Face versus OEM drilled which can crack
OEM Fitment & Functionality
72 Curved Vanes Force Cooling Air through Brake Disc
Replaceable Rotor Rings Which Saves Money Over OEM Replacement in the Long Run
Lower Long-term Maintenance Cost
WHAT'S INCLUDED:
370x24 Left Rotor
370x24 Right Rotor
Installation and Break-in Instruction Sheets
OE PART INTERCHANGE:
34 11 2 284 809 (L)
34 11 2 284 810 (R)
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
The 034Motorsport 370mmx24mm 2-Piece Floating Rear Brake Rotor Upgrade Kit for the BMW F8x M2/M3/M4 is a complete replacement brake rotor kit, designed to work flawlessly with the factory rear calipers found on the BMW F8x M2/M3/M4.
Weighing in at approximately 20.6lbs, our lightweight design retains proper thermal mass in the rings to adequately capture heat, while utilizing 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat.
The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form allowing hard street use and long days at the track allowing you to drive versus working on the car. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat, and improvement over the cooling of the factory rotor
The face of the rotor utilizes J-Slot slots to clean the pad and surface of contaminants and allows hot pad outgassing, all while reducing overall braking noise compared to a traditional slotted rotor.
The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.
FEATURES:
Lightweight Construction (20.6lb 034Motorsport Rotor), the Same Weight as OEM but With Improved Cooling and Metallurgy
Floating Bobbins, 2-Piece Design with radial and Lateral Expansion Capability, OE Only Allows Radial Expansion
Aerospace Grade Aluminum Hats
CM-250 Special Alloy Rotor Rings Designed Specifically for Hard Street and Track Use, OE Replacement Rotors Can Warm Under These Conditions
J-slotted Friction Face versus OEM drilled which can crack
OEM Fitment & Functionality
72 Curved Vanes Force Cooling Air through Brake Disc
Replaceable Rotor Rings Which Saves Money Over OEM Replacement in the Long Run
Lower Long-term Maintenance Cost
WHAT'S INCLUDED:
370x24 Left Rotor
370x24 Right Rotor
Installation and Break-in Instruction Sheets
OE PART INTERCHANGE:
34 11 2 284 809 (L)
34 11 2 284 810 (R)
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
This website does not show delivery estimates. For all products that are not in stock, the typical wait time is approximately 5-7 days.
Shipping times vary depending if the product is in stock at our suppliers warehouse and which shipping option is selected at checkout.
If you wish to get an accurate ETA, please contact us.