No Products in the Cart
We are VERY excited to be announcing the release of our 034Motorsport Street Density motor mounts for the B6/B7 Audi S4/RS4 and C5 Audi A6/S6/RS6 and Allroad!
We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!
WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications.
STREETDENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
THIS IS NOT AN OE MOUNT, OR AN RS4 MOUNT, AND THESE ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications for performance applications.
Combine with Density transmission mount and 034Motorsport snub mount and cage for the ultimate in performance drivetrain mounting.
Fitment:Please Note: Our Active Motor Mount Resistor Bypasses are sold separately, and are designed keep the check engine light off on vehicles equipped with Active Engine Mounts from the factory. Simply plug these in to the factory harness and go!
Please Note: The nuts for these mounts should be torqued to the factory specification of 25 Nm (approximately 18.5 ft. lbs.). Overtightening these nuts can cause damage to the mount!
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
