No Products in the Cart
The ECS billet aluminum boost tap adds 2 possible vacuum ports for your 2.0T boost specific needs. This boost tap was designed and engineered in-house specifically for the 2.0T. Built to simply fit in between the intake manifold and PCV hose with an OE c-clip.
Are you looking to add more than one vacuum assisted accessory to your 2.0T? No problem! The ECS Tuning 2.0T boost tap kit includes 2 possible vacuum ports to tie into when needed. If you only want to run one accessory all you have to do is install the included set screw to block off the other port. To be sure of a secure install of the ports or set screw we've also included a medium strength thread locker for peace of mind.
*Installation Note: When installing with our ECS Carbon Fiber Engine Cover (ES#2804425) and using both vacuum nipples on the boost tap, there may be slight interference between the plastic securing clip and the Carbon Fiber Engine Cover. To correct this issue, please use low profile clip (ES#25115) to secure the Boost Tap in place of the plastic connector clip.
Make | Model | Submodel | Engine |
---|---|---|---|
Audi | 8U Q3 | FWD | 2.0T |
Audi | 8U Q3 | Quattro | 2.0T |
Audi | A3 8P | FWD | 2.0T |
Audi | A3 8P | Quattro | 2.0T |
Audi | B7 A4 | FWD | 2.0T |
Audi | B7 A4 | Quattro | 2.0T |
Audi | B8 A4 | FWD | 2.0T |
Audi | B8 A4 | Quattro | 2.0T |
Audi | B8 A5 | Quattro | 2.0T |
Audi | B8 Allroad | Quattro | 2.0T |
Audi | C7 A6 | FWD | 2.0T |
Audi | C7 A6 | Quattro | 2.0T |
Audi | Q5 | Quattro | 2.0T |
Audi | TT | Quattro | 2.0T |
Audi | TT MKII | FWD | 2.0T |
Audi | TT MKII | Quattro | 2.0T |
Audi | TTS | MK2 (2006-2013) | 2.0T |
Audi | TTS | MK2 (2006-2013) | 2.0T |
Volkswagen | All | All | 2.0T |
Volkswagen | Jetta VI | Sedan | GLI |
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
The ECS billet aluminum boost tap adds 2 possible vacuum ports for your 2.0T boost specific needs. This boost tap was designed and engineered in-house specifically for the 2.0T. Built to simply fit in between the intake manifold and PCV hose with an OE c-clip.
Are you looking to add more than one vacuum assisted accessory to your 2.0T? No problem! The ECS Tuning 2.0T boost tap kit includes 2 possible vacuum ports to tie into when needed. If you only want to run one accessory all you have to do is install the included set screw to block off the other port. To be sure of a secure install of the ports or set screw we've also included a medium strength thread locker for peace of mind.
*Installation Note: When installing with our ECS Carbon Fiber Engine Cover (ES#2804425) and using both vacuum nipples on the boost tap, there may be slight interference between the plastic securing clip and the Carbon Fiber Engine Cover. To correct this issue, please use low profile clip (ES#25115) to secure the Boost Tap in place of the plastic connector clip.
Make | Model | Submodel | Engine |
---|---|---|---|
Audi | 8U Q3 | FWD | 2.0T |
Audi | 8U Q3 | Quattro | 2.0T |
Audi | A3 8P | FWD | 2.0T |
Audi | A3 8P | Quattro | 2.0T |
Audi | B7 A4 | FWD | 2.0T |
Audi | B7 A4 | Quattro | 2.0T |
Audi | B8 A4 | FWD | 2.0T |
Audi | B8 A4 | Quattro | 2.0T |
Audi | B8 A5 | Quattro | 2.0T |
Audi | B8 Allroad | Quattro | 2.0T |
Audi | C7 A6 | FWD | 2.0T |
Audi | C7 A6 | Quattro | 2.0T |
Audi | Q5 | Quattro | 2.0T |
Audi | TT | Quattro | 2.0T |
Audi | TT MKII | FWD | 2.0T |
Audi | TT MKII | Quattro | 2.0T |
Audi | TTS | MK2 (2006-2013) | 2.0T |
Audi | TTS | MK2 (2006-2013) | 2.0T |
Volkswagen | All | All | 2.0T |
Volkswagen | Jetta VI | Sedan | GLI |
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
This website does not show delivery estimates. For all products that are not in stock, the typical wait time is approximately 5-7 days.
Shipping times vary depending if the product is in stock at our suppliers warehouse and which shipping option is selected at checkout.
If you wish to get an accurate ETA, please contact us.