No Products in the Cart
ECS Tuning has the set the bar once again. After years of Research & Development and stringent product testing by our in house engineers, we are proud to release the best engineered Engine Mounts on the market! Designed and manufactured in the USA using the finest quality materials, we designed our ECS Performance Mounts to better control fore/aft engine movement and allow for seamless power transfer to the tires. Wheel hop is lessened, throttle response is improved and gear engagement is more precise. At the center of our Performance Drivetrain Mount Kit is our ECS Performance Pendulum Mount. Featuring a Teflon-Lined Spherical Bearing, this bearing replaces the factory-designed rubber bushing and cast mount that are prone to failure, even at stock power levels. All weather seals capture the spherical bearing to keep the elements out and the bearing operating maintenance-free. By replacing the bushing and cast mount at the extension body we are able to eliminate front bushing deflection and premature failure altogether. To harness maximum engine control, we've paired our ECS Pendulum Mount with our 70A Durometer ECS Performance Engine and Transmission Mounts. Factory engine and transmission mounts were designed to facilitate comfort with little focus on performance. When combined with commonly worn bushings, this makes replacing, while upgrading your mounts an absolute must when making more power! Two vertically captured 70A Durometer Polyurethane Bushings, encapsulated between three 6061-T6 Billet Machined Aluminum bodies, help to keep the driveline locked in place. Noise, Vibration and Harshness (NVH) are minimized over our competitors due to years of product testing and development. Designed to absorb NVH while withstanding extreme driveline forces, we've engineered our bushings using an optimal formula and durometer polyurethane, tuning the natural frequency and preload to the forcing frequency of the engine. This allows for smooth power delivery through the driveline and to the tires, all with very minimal chassis feedback to balance comfort with performance. All machined components are constructed of strong and lightweight 6061-T6 Billet Aluminum and are then anodized black for a great appearance and corrosion resistance. Genuine Volkswagen Torque to Yield Fasteners are included for proper installation for each mount. Simply follow our helpful Installation PDF for installation notes and torque specifications. **Please note that when combined with our ECS Performance Transmission Mount, we've found there is a greater level of NVH transmitted to the interior. This combination is best suited for Race or High Performance Street Vehicles.** * Accommodates fitment into what is commonly referred to "Version 1" and "Version 2" subframe bushings. Our unique design fits all MQB chassis vehicles listed under the "Fits These Cars" tab.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
ECS Tuning has the set the bar once again. After years of Research & Development and stringent product testing by our in house engineers, we are proud to release the best engineered Engine Mounts on the market! Designed and manufactured in the USA using the finest quality materials, we designed our ECS Performance Mounts to better control fore/aft engine movement and allow for seamless power transfer to the tires. Wheel hop is lessened, throttle response is improved and gear engagement is more precise. At the center of our Performance Drivetrain Mount Kit is our ECS Performance Pendulum Mount. Featuring a Teflon-Lined Spherical Bearing, this bearing replaces the factory-designed rubber bushing and cast mount that are prone to failure, even at stock power levels. All weather seals capture the spherical bearing to keep the elements out and the bearing operating maintenance-free. By replacing the bushing and cast mount at the extension body we are able to eliminate front bushing deflection and premature failure altogether. To harness maximum engine control, we've paired our ECS Pendulum Mount with our 70A Durometer ECS Performance Engine and Transmission Mounts. Factory engine and transmission mounts were designed to facilitate comfort with little focus on performance. When combined with commonly worn bushings, this makes replacing, while upgrading your mounts an absolute must when making more power! Two vertically captured 70A Durometer Polyurethane Bushings, encapsulated between three 6061-T6 Billet Machined Aluminum bodies, help to keep the driveline locked in place. Noise, Vibration and Harshness (NVH) are minimized over our competitors due to years of product testing and development. Designed to absorb NVH while withstanding extreme driveline forces, we've engineered our bushings using an optimal formula and durometer polyurethane, tuning the natural frequency and preload to the forcing frequency of the engine. This allows for smooth power delivery through the driveline and to the tires, all with very minimal chassis feedback to balance comfort with performance. All machined components are constructed of strong and lightweight 6061-T6 Billet Aluminum and are then anodized black for a great appearance and corrosion resistance. Genuine Volkswagen Torque to Yield Fasteners are included for proper installation for each mount. Simply follow our helpful Installation PDF for installation notes and torque specifications. **Please note that when combined with our ECS Performance Transmission Mount, we've found there is a greater level of NVH transmitted to the interior. This combination is best suited for Race or High Performance Street Vehicles.** * Accommodates fitment into what is commonly referred to "Version 1" and "Version 2" subframe bushings. Our unique design fits all MQB chassis vehicles listed under the "Fits These Cars" tab.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
This website does not show delivery estimates. For all products that are not in stock, the typical wait time is approximately 5-7 days.
Shipping times vary depending if the product is in stock at our suppliers warehouse and which shipping option is selected at checkout.
If you wish to get an accurate ETA, please contact us.