No Products in the Cart
*Prior to ordering check the pins to see if you have round or flat! The difference between a round pin and a flat pin coil is determined by the pins that connect the coil to the wiring harness and can be easily determined as follows. Slide the red locking tab to the right, press down on the tab and pull the connector off the coil. Check connector to see if you have flat pins or round pins. Push the connector back on until it clicks in place and slide the red locking tab back to the left, locking position. This performance coil pack is used by most MINI owners as the performance option to the stock coil. You will have to remove the factory bolts and from your old coil and remove the MSD factory sleeves to insert and drill out 1/16in to allow the stock bolts to fit. Kits include Inductance:7mH Maximum voltage:36,000 Volts Primary resistance:.51 OHMs Secondary resistance:12K OHMs Turns ratio:77:1
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
