No Products in the Cart
If you’re looking to improve the handling of your Audi B8, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most owners to be satisfied. Engineered, designed, and tested in-house at ECS Tuning, you know these sway bars are built to last with the highest quality. Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground. By upgrading to ECS Tuning Adjustable Front and Rear Sway Bars, you will experience less body roll, and an improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality. The sway bars are also adjustable, and allow for a “softer” setting, or a “stiffer” setting, depending on your driving preferences. Adjustable Front Sway Bar: Design: 1.25” (31.75mm) OD, 0.120” (3.05mm) wall DOM (hollow) tubing Black powder coated for corrosion resistance 80A Durometer custom polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Complete with ECS Tuning adjustable end links Fully reversible back to factory components Performance: 38% stiffness increase on “soft” setting 48% stiffness increase on “stiff” setting Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time Adjustable Rear Sway Bar: Design: 1.00” (24.4mm) OD, solid spring steel bar Black powder coated for corrosion resistance 80A Durometer custom polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Fully reversible back to factory components Performance: 125% stiffness increase on “soft” setting 150% stiffness increase on “stiff” setting Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
If you’re looking to improve the handling of your Audi B8, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most owners to be satisfied. Engineered, designed, and tested in-house at ECS Tuning, you know these sway bars are built to last with the highest quality. Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground. By upgrading to ECS Tuning Adjustable Front and Rear Sway Bars, you will experience less body roll, and an improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality. The sway bars are also adjustable, and allow for a “softer” setting, or a “stiffer” setting, depending on your driving preferences. Adjustable Front Sway Bar: Design: 1.25” (31.75mm) OD, 0.120” (3.05mm) wall DOM (hollow) tubing Black powder coated for corrosion resistance 80A Durometer custom polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Complete with ECS Tuning adjustable end links Fully reversible back to factory components Performance: 38% stiffness increase on “soft” setting 48% stiffness increase on “stiff” setting Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time Adjustable Rear Sway Bar: Design: 1.00” (24.4mm) OD, solid spring steel bar Black powder coated for corrosion resistance 80A Durometer custom polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Fully reversible back to factory components Performance: 125% stiffness increase on “soft” setting 150% stiffness increase on “stiff” setting Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
This website does not show delivery estimates. For all products that are not in stock, the typical wait time is approximately 5-7 days.
Shipping times vary depending if the product is in stock at our suppliers warehouse and which shipping option is selected at checkout.
If you wish to get an accurate ETA, please contact us.