APR Braided Stainless Steel Brake Lines (Set of 2) - Front

APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need! Made in the USA Compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids Less expansion than stock for a firmer pedal feel with less pedal travel High quality copper crush washers Attractive polyvinyl chloride (PVC) outer jacket in smoked clear with red inserts and polished connectors Average expansion of only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi Cr3+ steel connectors featuring an attractive polished finish Stronger than the factory lines to better resist failure DOT-compliant Independently lab certified as SAE “low-expansion” lines Tested and meets FMVSS106 and SAE J1401 standards All necessary hardware and included Direct-fit plug-and-play upgrade Braided 304 stainless steel lines and connectors with a smooth-bore polytetrafluoroethylene (PTFE) / Teflon core Application specific lengths connectors which resist leaks better than adapters Each unit tested to 3,000 PSI, which is far beyond typical operating pressures

VEHICLE FITMENT

2015-2020 Audi A3 Quattro Premium Plus Premium Prestige (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2015-2020 Audi A3 TDI Premium TDI Prestige TDI Premium Plus Prestige Premium Premium Plus Titanium (Liter: 2.0, 1.8 & Engine(ci): 120, 110, 121 & Cylinder: 4 & Block: L) 2015-2020 Audi S3 Premium Plus Prestige Premium (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2016-2023 Audi TT Quattro Base (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2015-2019 Volkswagen Golf SportWagen S SEL SE TDI S TDI SEL TDI SE Limited Edition (Liter: 1.8, 2.0, 1.4 & Engine(ci): 110, 120, 85 & Cylinder: 4 & Block: L) 2015-2023 Volkswagen Golf R Base 20th Anniversary Edition (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2017-2019 Volkswagen Golf Alltrack SEL SE S (Liter: 1.8 & Engine(ci): 110 & Cylinder: 4 & Block: L) 2019-2023 Volkswagen Arteon SEL R-Line SEL Premium R-Line SE SEL SE R-Line (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2018-2023 Volkswagen Tiguan S SE SEL SEL Premium SEL Premium R-Line SEL R-Line SEL R-Line Jet Black SE R-Line Black (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2015-2023 Volkswagen GTI S Autobahn SE Sport Rabbit Edition (Liter: 2.0 & Engine(ci): 121 & Cylinder: 4 & Block: L) 2019-2023 Volkswagen Jetta GLI Autobahn R-Line SEL SE GLI S S SEL Premium GLI 35th Anniversary Edition Sport (Liter: 2.0, 1.4, 1.5 & Engine(ci): 121, 85, 91 & Cylinder: 4 & Block: L) 2015-2021 Volkswagen Golf S SE SEL Launch Edition TDI SE TDI SEL TDI S Base Wolfsburg Edition TSi (Liter: 1.8, 2.0, 1.4 & Engine(ci): 110, 120, 85 & Cylinder: 4 & Block: L)