• GUARANTEED FITMENT
  • COMPETITIVE PRICING
  • FREE SHIPPING ON ALL ORDERS ABOVE 249$ CAD*
ECS Tuning Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5 35d
ECS Tuning Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5 35d
ECS Tuning Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5 35d
  • SKU: 4780238
  • Availability: In stock Usually ships within 5-7 Days Special Order 4-6 Weeks

ECS Tuning Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5 35d

$1,089.92
  • Brand: ECS Tuning
  • UPC:

RECENTLY VIEWED PRODUCTS

DESCRIPTION

The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system!

Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage.

If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced.

This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more.

Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process!

Standard tools you might need but are not included:

  • 8mm Drill Bit (to use as flywheel locking pin)
  • 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place
  • 24mm Box Wrench - For releasing tensioner
  • Torque Wrench - To torque new crankshaft bolts
  • Breaker Bar - to drive the crankshaft bolts further
DOCUMENTS
AVAILABILITY

Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details. 

In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.

Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.

Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary. 

If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h. 

WARRANTY

12 Months

All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.

* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com

REVIEWS