No Products in the Cart
Take control of your Audi Q5 2.0T engine and transmission tunes from your phone! iE's cutting-edge and innovative POWER link Bluetooth dongle plugs into your vehicle's OBD II port creatig a wireless link for our responsive mobile app to flash your tunes, change launch control settings, switch octanes, upgrade stages, perform diagnostics, monitor live gauge data, and more all from your Apple or Android phone!
Ethanol is rocket fuel for your daily driver. Our TrueFlex flex-fuel conversion kit upgrades the factory engine computer to read and instantly adapt to any Ethanol blend, unleashing huge power.
TrueFlex Tuning is included with every stage, additional hardware is required.
2021+ model years and some 2019-2020 variations are equipped with a Gen 2 factory transmission control unit (TCU) with advanced factory security that locks them from tuning. Stock TCU tunes include software limiters that restrict engine power when torque limits are exceeded from ECU tuning. For Q5 models with locked TCUs, our calibration team has custom-coded the engine control unit (ECU) programming to properly manage torque signals to and from the transmission. This advanced strategy safely enables full horsepower and torque, even without a TCU tune.
Included on all stages and octanes.
Add significant increases in performance with up to 314 horsepower and 396ft-lbs from an iE Stage 1 ECU Tune for your Audi B9 Q5. Flash instant horsepower gains, increased torque, and faster acceleration with octane-specific map options for 91, 93, or TrueFlex ethanol fuels. Engineered to operate on stock hardware or compatible with intake, intercooler, catback exhaust, and TrueFlex upgrades.
See the performance tab for power results and dyno charts.
Ready for more? The iE Stage 2 ECU tune with an upgraded downpipe delivers the most performance potential available from your stock engine and turbocharger with a tire-spinning 337-377HP and 410-456ft-lbs of torque! Maximum accelration gains are realized across the powerband with options for 91, 93, 104, or TrueFlex ethanol fuels. Stage 2 includes aggressive exhaust afterrun in sport mode.
See below for a list of Stage 2 hardware requirements.
Upgrading from Stage 1 to Stage 2 or beyond is easy! With iE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, follow the instructions on your IE POWERlink app to purchase the tune upgrade, and you will be blowing away the competition in minutes!
While no hardware upgrades are required for Stage 1, upgrading the intake and intercooler will provide increased airflow, lower intake air temps, and quicker heat soak recovery for an overall more efficient and faster vehicle.
| PART UPGRADE | STAGE 1 | STAGE 2 | NOTES |
|---|---|---|---|
| AIR INTAKE | ✓ | ✓ | Recommended |
| TCU TUNE | ✓ | ✓ | Highly recommended |
| INTERCOOLER | ✓ | ✓ | Highly recommended on Stage 2 |
| CATBACK EXHAUST | ✓ | ✓ | Compatible with all stages |
| HPFP UPGRADE(FUEL PUMP) | ✓ | ✓ | Required for TrueFlex only |
| DOWNPIPE | X | ✓ | Not Compatible With Stage 1 |
✓ compatible ● required ✕ not compatible
Your new high-performance tune is calibrated to safely maximize the engine and turbocharger power capability without sacrificing safety functions or daily comfort. All safety protocols and sensors are reprogrammed and expanded to the new performance tuning. Every ECU parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify safety operations in any condition. Confidently drive from LA to Pikes Peak with the power to keep you smiling every mile!
" Earned a customer for life -Brenton
We sweat the details and prioritize customers in everything we do. We want what you want; a simple purchase process with products that exceed expectations. If you have any questions or require support with your tunes; our educated customer support team is standing by. Purchasing an iE tune not only guarantees a quality product, it's a promise that you will always have us in your corner.
We have your back / -Blais Bros.
Unlock the full potential of your iE B9 SUV Stage 1 or Stage 2 engine (ECU) tune with our matching transmission (TCU) tune. Without it, your power gains and performance features are limited, leaving untapped acceleration and power on the table. Upgrading to the iE TCU tune significantly enhances shift speeds, eliminates torque limiters, increases line pressure to prevent transmission slip, and introduces user-adjustable launch control functions. Experience a dramatic enhancement in launch power, pulling force, shift responsiveness, and overall acceleration.
Important note: Compatible with 2017-2020 DL382 DSG "Gen 1" transmissions only. TCU tune is currently incompatible with all 2021+ "Gen 2" TCU versions. In some rare cases, 2019 and 2020 model year vehicles may be equipped with unsupported Gen 2 variations.
Experience chest-pounding launches with our iE transmission tune featuring adjustable launch control. Tailored for optimal performance, choose from three distinct launch options: street, aggressive, and race. Each option increases the launch RPMs, allowing you to customize the launch experience to suit your vehicle and tire setup for the best grip and take-off power. Each launch setting offers two RPM launch and AMAX options, easily controlled by the throttle pedal:
Note: AMAX is an advanced shift programming that greatly improves accleration by maintaing power to both transmission clutches simutaniously while transitioning between gears. This feature delivers a strong advantage in a competitive drag racing type scenario.
| LAUNCH SETTING | MINIMUM RPM | MAXIMUM RPM |
|---|---|---|
| STREET | 3000 RPM | 3400 RPM (W/AMAX) |
| AGGRESSIVE | 3400 RPM | 3800 RPM (W/AMAX) |
| RACE | 3800 RPM | 4200 RPM (W/AMAX) |
▶ Watch the video
The factory transmission calibration often falls short in meeting the demands of performance enthusiasts, leaving much to be desired. iE's TCU tune addresses these limitations by entirely reworking the transmission drive-mapping strategy, catering specifically to the enthusiast driver. Beyond driving improvements, our TCU tune introduces additional features designed to enhance the driving experience:
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
| STAGE / FUEL | HORSEPOWER | TORQUE |
|---|---|---|
| Stock VW/ Audi advertised numbers | 252 HP | 273 FT-LBS |
| Stock IE dyno numbers | 262 HP | 296 FT-LBS |
| Stage 1 91 AKI / 95 RON | 308 HP | 394 FT-LBS |
| Stage 1 93 AKI / 98 RON | 314 HP | 396 FT-LBS |
| Stage 1 TrueFlex E40-E60 | 359 HP | 448 FT-LBS |
| Stage 2 91 AKI / 95 RON | 337 HP | 410 FT-LBS |
| Stage 2 93 AKI / 98 RON | 343 HP | 412 FT-LBS |
| Stage 2 104 AKI / 108 RON | 359 HP | 445 FT-LBS |
| Stage 2 TrueFlex E40-E60 | 378HP | 456 FT-LBS |
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.
TUNE UPDATES Your tune purchase entitles you to free updates to any tune revisions, new octanes, standard features, or software updates. In the event the original vehicle manufacturer issues an ECU or TCU update, this will also be included to you through iE at no additional charge.
POWERLINK VINS Have multiple cars in the family or friends that are also ready for an iE Tune? Your POWERlink Flash Tool can be used on up to 5 different vehicle VINs. Tunes sold separately.
TUNE REGISTRATION Once a tune purchase is applied to your vehicle's ECU or TCU, the tune is permanently registered to the vehicle and non-transferable to other vehicles. Tunes can be transferred to a second party in the event of vehicle transfer of ownership only.
REST OF WORLD (ROW) SUPPORT Although IE does offer ROW purchases of software files, some ECUs available only in certain countries or markets may not be supported in our current file library. If you have access to read your ECU code, please contact us to verify compatibility before purchase.
DOWNPIPE NOTICE By purchasing a motorsport/racing product ("product"), you represent that you understand and agree that: The product is not designed to meet any applicable emissions standards, whether in the USA or otherwise, the product is not C.A.R.B. compliant, and that the product is not for sale or use in the state of California, USA nor any other jurisdiction where the sale or use is prohibited by law. Integrated Engineering, LLC (iE) makes no representations, warranties, or claims that this product complies with any applicable emissions laws and expressly disclaims an and all such representations, warranties, and claims, whether expressed or implied. By purchasing this product, you represent, warrant, and agree that it is your responsibility to inform yourself or any laws or regulations that may apply to your purchase and/or use of the product.
Important note: Engine ECU tuning is compatible with 2017-2020 model years only, and is incompatible with the new 2021+ ECU variations. Transmission TCU tunes are compatible with DL382 DSG "Gen 1" transmissions only up to most 2020 model years. In some rare cases, 2019 and 2020 model year vehicles may be equipped with unsupported Gen 2 TCU variations. Compatibility Questions? Contact us for fast and easy help
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost. Eurosport Performance is not responsible for fitment inaccuracies regardings products sold outside of the United States or Canada. Please confirm compatibility prior to placing an order or contact us for more information.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com

