No Products in the Cart
IE's performance EA837 ECU calibrations for the Audi B8/B8.5 and C7 3.0T TFSI engines fully release the power potential in only minutes, all from your phone! Let your S4, S5, A6, A7, or SQ5 put a smile on your face and experience the power and thrills from your new tune as it transforms your car into a supercharged beast!
UP TO
548HP & 525TQ
POWER YOU CAN FEEL
Features:
IE Stage 1 ECU calibration dramatically increases performance with up to 416HP & 391TQ, transforming your supercharged 3.0L into a truly performance-classed vehicle. Engineered to operate on entirely stock hardware and compatible with basic bolt-ons (intake, exhaust, heat exchanger) without the need to retune.
Stage 2 single pulley files are calibrated for a smaller press-on supercharger pulley delivering up to 492HP with minimal hardware upgrades. The single pulley ratio is achieved by driving the supercharger faster via the smaller pulley. See below for recommended pulley option:
| PULLEY STYLE | IE PART NUMBER | PULLEY SIZE (MM) | FINAL RATIO |
|
Press-fit SC pulley |
IEBAVJ1C |
57.5 |
2.8217 |
Go all out and maximize the full power potential available from the factory supercharger with a stage 2 dual pulley setup. The maximized dual pulley ratio can be achieved by combining the smaller 57.5mm press-fit supercharger pulley with a 188mm crank pulley -or skip to dual pulley in one product with the single 207mm overdrive crank pulley for up to 548HP! See below for recommended pulley options.
| PULLEY STYLE | IE PART NUMBER | PULLEY SIZE (MM) | FINAL RATIO |
|
57.5mm SC & 188mm crank pulley combo |
IEBAVJ1C & IEBAVJ7 |
57.5 & 188 |
3.2695 |
|
207mm crank pulley |
IEBAVJ6 |
207mm |
3.2753 |
| PART UPGRADE | STAGE 1 | SINGLE PULLEY | DUAL PULLEY |
|
DSG TUNE OR CLUTCH UPGRADE |
OPTIONAL |
HIGHLY RECOMMENDED |
REQUIRED |
|
AIR INTAKE |
OPTIONAL |
OPTIONAL |
HIGHLY RECOMMENDED |
|
HEAT EXCHANGER UPGRADE |
OPTIONAL |
HIGHLY RECOMMENDED |
REQUIRED |
|
SUPERCHARGER PULLEY 57.5MM (PRESS-ON) |
NOT COMPATIBLE |
REQUIRED |
REQUIRED WITH 188MM LOWER |
|
CRANK PULLEY 188MM |
NOT COMPATIBLE |
NOT COMPATIBLE |
REQUIRED WITH 57.5MM UPPER |
|
CRANK PULLEY 207MM |
NOT COMPATIBLE |
NOT COMPATIBLE |
REQUIRED WITH STOCK UPPER |
|
HPFP UPGRADE |
NOT COMPATIBLE |
NOT COMPATIBLE |
HIGHLY RECOMMENDED FOR E40 USE |
|
THROTTLE BODY UPGRADE |
NOT COMPATIBLE |
NOT COMPATIBLE |
HIGHLY RECOMMENDED |
|
DOWNPIPES |
OPTIONAL |
OPTIONAL |
OPTIONAL |
|
CATBACK |
OPTIONAL |
OPTIONAL |
OPTIONAL |
Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides the tuning potential for a massive horsepower and torque gain over running conventional gasoline and is more readily available (in most states) and less expensive than race gas. The factory fuel system with an upgraded HPFP (high pressure fuel pump) can support a maximum mix of 2/5ths E85 and 3/5ths 91/93 premium gas to produce an E40 ethanol blend delivering up to an intense 548HP & 525ft-lbs of torque!
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
| STAGE / FUEL | HORSEPOWER | TORQUE |
|
Stock Audi advertised numbers |
333 HP |
325 FT-LBS |
|
Stock IE dyno numbers |
329 HP |
339 FT-LBS |
|
Stage 1 91 AKI / 95 RON |
403 HP |
387 FT-LBS |
|
Stage 1 93 AKI / 98 RON |
416 HP |
391 FT-LBS |
|
Single pulley 91 AKI / 95 RON |
422 HP |
416 FT-LBS |
|
Single pulley 93 AKI / 98 RON |
435 HP |
423 FT-LBS |
|
Single pulley 100 AKI / 104 RON |
486 HP |
443 FT-LBS |
|
Single pulley 104 AKI / 104 RON |
492 HP |
449 FT-LBS |
|
Dual pulley 91 AKI / 95 RON |
444 HP |
459 FT-LBS |
|
Dual pulley 93 AKI / 98 RON |
453 HP |
469 FT-LBS |
|
Dual pulley 100 AKI / 104 RON |
511 HP |
498 FT-LBS |
|
Dual pulley 104 AKI / 104 RON |
519 HP |
508 FT-LBS |
|
Dual pulley E40 ethanol blend |
534 HP |
520 FT-LBS |
|
Dual pulley throttle body 91 AKI / 95 RON |
452 HP |
462 FT-LBS |
|
Dual pulley throttle body 93 AKI / 98 RON |
462 HP |
471 FT-LBS |
|
Dual pulley throttle body 100 AKI / 104 RON |
521 HP |
504 FT-LBS |
|
Dual pulley throttle body 104 AKI / 104 RON |
534 HP |
513 FT-LBS |
|
Dual pulley throttle body E40 ethanol blend |
548 HP |
525 FT-LBS |
| MAKE | MODEL | YEAR | ENGINE |
|
AUDI |
S4 |
B8/B8.5 2009-2016 |
3.0T TFSI Supercharged |
|
AUDI |
S5 |
B8/B8.5 2013-2015 |
3.0T TFSI Supercharged |
|
AUDI |
S5 convertible |
B8/B8.5 2008-2015 |
3.0T TFSI Supercharged |
|
AUDI |
SQ5 |
B8/B8.5/8R 2012-2017 |
3.0T TFSI Supercharged |
|
AUDI |
Q5 |
B8/B8.5/8R 2008-2017 |
3.0T TFSI Supercharged |
|
AUDI |
A6 |
C7/C7.5 2012-2016* |
3.0T TFSI Supercharged* |
|
AUDI |
A7 |
C7/C7.5 2012-2016* |
3.0T TFSI Supercharged* |
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
