No Products in the Cart
Your 2016-2018 Audi A6/A7 3.0T with the updated CREC supercharged engine capable of massive power gains in only minutes from an IE ECU Tune. Unleash hidden horsepower and torque to turn your sporty A6 or A7 into an extremely competitive powerhouse in only minutes from your phone!
UP TO
524HP & 438TQ
POWER YOU CAN FEEL
Features:
STAGE 1
IE Stage 1 tunes for your Audi A6 or A7 instantly increase performance with more horsepower, torque, and faster acceleration. With octane specific map options for 91, 93, or E85 octane, fill up with your choice of fuel with no hidden power left behind. Engineered to operate on completely stock hardware or compatible with intake, heat exchanger, and exhaust upgrades.
STAGE 2 SINGLE PULLEY
Stage 2 single pulley files are calibrated to increase performance and deliver increased boost from a supercharger pulley upgrade. This ECU calibration combined with a 57.5mm bolt-on supercharger pulleydelivers up to 524HP with minimal hardware upgrades.
Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, follow the instructions on your IE POWERlink app to purchase the tune upgrade, and you will be blowing away the competition in minutes!
| PART UPGRADE | STAGE 1 | STAGE 2 |
|
TRANSMISSION TUNE |
OPTIONAL (highly recommended) |
OPTIONAL (recommended for highest power output) |
|
AIR INTAKE |
OPTIONAL |
OPTIONAL |
|
HEAT EXCHANGER |
OPTIONAL |
OPTIONAL (highly recommended) |
|
IE DOWNPIPES |
OPTIONAL |
OPTIONAL |
|
UPPER PULLEY |
NOT COMPATIBLE |
REQUIRED |
|
LOWER PULLEY |
NOT COMPATIBLE |
NOT COMPATIBLE |
All stages of IE ECU calibrations for the C7.5 A6 & A7 are compatible with the matching IE ZF8 AL551 Transmission TCU Tune and is highly recommended to reach the advertised power figures. Without a matching TCU tune, the transmission will short shift the powerband at 6300 RPM vs. the ECU tune's peak power at 7200RPM -leaving power on the table. Adding the TCU upgrade also modifies shift speed, torque limit maps, line pressure, and launch control functions resulting in a complete ECU & TCU performance package.
Commonly used in roll racing, Brake Boosting allows you to build extra boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" or extra surge of power. Brake Boost is included on all tune stages.
| STAGE / FUEL | HORSEPOWER | TORQUE |
|
Stock Audi advertised numbers |
340 HP |
333 FT-LBS |
|
Stock IE dyno numbers |
340 HP |
347 FT-LBS |
|
Stage 1 91 AKI / 95 RON |
423 HP |
384 FT-LBS |
|
Stage 1 93 AKI / 98 RON |
432 HP |
391 FT-LBS |
|
Stage 1 E85 |
506 HP |
414 FT-LBS |
|
Single Pulley 91 AKI / 95 RON |
438 HP |
388 FT-LBS |
|
Single Pulley 93 AKI / 98 RON |
446 HP |
395 FT-LBS |
|
Single Pulley E85 |
524 HP |
438 FT-LBS |
| MAKE | MODEL | YEAR | GENERATION | ENGINE |
|
AUDI |
A6 |
2016-2018 |
C7.5 |
3.0T Supercharged (CREC engine code) |
|
AUDI |
A7 |
2016-2018 |
C7.5 |
3.0T Supercharged (CREC engine code) |
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
