034Motorsport Sway Bar Teflon Bushing Rear Rebuild & Upgrade Kit, Audi B8/B8.5 & B9/B9.5 Q5/SQ5, C8 A6/A7 & S6/S7

Product Description:

The Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes everything you need to replace the polyurethane bushings included with your 034Motorsport Rear Sway Bar with Teflon-lined bushings.

These maintenance-free polyurethane bushings with a Teflon and polyester liner are designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty covering material cracking, Teflon liner, and polyurethane bushing separation, or squeaking under normal street or track conditions.

The 034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes 2 Teflon-lined bushings and plugs to replace the Zerk fitting that exists on your 034Motorsport Sway Bar Bracket.

Features:

• Upgrade from previously supplied Standard Polyurethane Bushings, Which Require Periodic Re-greasing.
• Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
  • Teflon and Polyester Composition Liner that Virtually Eliminates Noise, Vibration and Harshness (NVH).
  • Improves Sway Bar Response Speed
  • Extended Service Life
  • No Additional Lubricant Needed, and Should Not Be Added
  • Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
  • Is Not Chemically Reactive, Will Not Be Affected by Common Chemicals Present In The Automotive Environment
  • Heat Resistant, Can Operate Continuously at Temperatures Up to 500°F, Much Higher Than What Any Bushing Would See
  • Limited Lifetime Warranty, Covering Manufacturing Defects:
    • Material Cracking
    • Separation of Teflon liner and Polyurethane Bushing
    • Squeaking Under Normal (Street/Track) Conditions

NOTE: During installation, it is essential to remove all existing grease from the sway bar before installing the new Teflon-lined bushings. We recommend using a rag and a degreaser, followed by a standard cleaner, to ensure the surface is completely dry before installation.

What’s Included:

• 2x) 034Motorsport Teflon Lined Bushings
• 2x) M6 Plugs (To Replace Zerk Fittings)
• Blue Loctite