No Products in the Cart
Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability.
At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.
HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING
Torque Holding Capacity: 528 ft/lbs
This kit fits 1989-1998 Nissan 240SX transmissions with an SR20DET 2.0L and will not work with the factory KA24
What’s IncludedBreak-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
Disclaimers
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.
*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
*High-performance racing component. May be used in dual-purpose vehicles. Not intended as OEM replacements. This part is built with performance characteristics.
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
