No Products in the Cart
If you’re looking to improve the handling of your Audi Q5/SQ5 or C7 A6/S6 A7/S7, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most owners to be satisfied.
Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground. By upgrading to the ECS Tuning Adjustable Rear Sway Bar, you will experience less body roll, and an improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality. The sway bars are also adjustable, and allow for a “softer” setting, or a “stiffer” setting, depending on your driving preferences.
Adjustable Rear Sway Bar:
Design:
1.00” (25.4mm) OD, solid spring steel bar
Black powder coated for corrosion resistance
80A Durometer custom polyurethane greaseable bushings - reduces flex at mount as compared to OEM rubber
Grooved bushing inside diameter for improved grease retention
Black anodized 6061-T6 billet brackets with check valve grease port
Fully reversible back to factory components
Performance:
194% stiffness increase on “soft” setting
243% stiffness increase on “stiff” setting
Reduced body roll without excessive change in dynamic F/R balance
Increased cornering speed and response time
Recommended hardware for end links: ES#10150 and ES#471506
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
