No Products in the Cart
The ECS Billet Aluminum Throttle Body Boost Tap Kit conveniently adds two boost / vacuum ports to your Gen3 engine for any of your specific needs. Located between the intake manifold and throttle body, this location provides a strong pneumatic signal and allows for a completely reversible install.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as stacking the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU, such as intake air temperature (15-20° F lower at WOT), ignition timing (as much as -5°) and air / fuel ratio (+1.0 point richer by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Throttle Body Boost Tap with 2 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and made in America, our Throttle Body Boost Tap includes the following:
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Throttle Body Boost Tap Kit from ECS Tuning!
** Replacement intake manifold seals are not included. Though not required on low mileage vehicles, we recommend these be replaced if your engine has greater than 50,000 miles **
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
