The iE B9 A4 / A5 Hybrid Turbo by Turbosystems erases the factory airflow ceiling to deliver a serious performance jump for your longitudinal 2.0T. This direct bolt-in hardware turns a quick car into a relentless powerhouse without sacrificing daily usability.
Budget hybrids often feel sluggish off the line. This ball bearing CHRA hybrid keeps power delivery crisp and immediate. Full boost arrives in the low 3000 RPM range, keeping the car's punchy, fun-to-drive character alive on the street.
For beast-mode performance, your engine needs to pull a ton of air. This Stage 3 turbo upgrade delivers maximum airflow and boost pressure with larger, more efficient wheels, pushing your B9 A4 to new heights of aggression in motion.
The enlarged turbine housing is specifically balanced to lower exhaust back pressure without the typical "big turbo" tradeoffs. This is critical for maximizing pump gas performance. You get high-RPM flow while keeping the snappy, fast-spooling feel of a much smaller unit.
This hybrid turbo is the foundation for the iE Stage 3 ecosystem. As part of a complete, calibrated, high-performance package, it’s a key player in unlocking your B9 A4’s full potential with our iE B9 A4 Turbo Systems Hybrid Tune.
| Fuel | Required Upgrades |
|---|---|
| 91 / 93 Octane | Air Intake Intercooler Downpipe Turbo Systems Hybrid Turbo HPFP Upgrade 5 Bar Map Sensors VW Injectors (06K906036N) VW Injector Clips (06J133036F) iE Stage 3 Transmission Tune Stage 3 Map Pack APEX Tune Suite |
Yes. The turbo is designed to fit in the factory location and retains all OEM plumbing and mounting points. Requires matching software.
When installed with the required hardware upgrades and iE Stage 3 engine & transmission tuning, this bolt-in turbo upgrade produces up to 424 horsepower and 424 ft-lbs of torque!
iE B9 A4 Apex Tier, Stage 3 Map Pack Engine Tune and Stage 3 TCU Tune are mandatory to run this turbo safely and correctly on your Longitudinal EA888 Gen 3. For hardware, you will need an upgraded air intake, 5 bar map sensors, intercooler, HPFP Upgrade and VW Golf R injector upgrade (X4 injectors VW PN: 06K906036N and X4 injector clips VW PN: 06J133036F). See iE Stage 3 Map Pack for more info.
The hybrid features a larger internal compressor, turbine wheels, and compressor and turbine housings, allowing it to move significantly more air and create higher boost pressures over the stock OEM turbo.
The hybrid features larger internal compressor and turbine wheels and larger compressor and turbine housings. This allows it to move significantly more air and create higher boost pressures.
It may, but if that's your intended purpose, please - don't buy this from us. We have not confirmed the fitment on the A4 / A5 FWD “Ultra” cars and do not provide software support for them - if you buy this from us for this purpose, we can't offer you support.
Eurosport Performance does not have live inventory. Although we aim shipping out not stocked products within 5 business days, supply constraints, import proceedures and product availability can cause additionnal delays. Please refer to the table below for more accurate details.
In stock - We have the item in stock at our warehouse and you can expect fulfillment within 24 hours.
Usually ships within 5-7 business days - We must import this product from our supplier or the manufacturer. Standard import proceedures take between 5-7 business days and you can expect fulfillment within 8 business days.
Back ordered - This product is out of stock at our warehouse with units in transit from our supplier. Fulfillment can vary.
If you wish to have a more accurate ETA, please send us a message at info@es-performance.com and we will respond within 24-48h.
12 Months
All products sold by Eurosport Performance are warrantied against manufacturing defects according to the manufacturer's warranty policy*. Warranty does not cover abuse, misuse, damages caused from improper manipulation, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective, the customer will receive, at the discretion of Eurosport Performance, a replacement part at no extra cost. Eurosport Performance is not responsible for fitment inaccuracies regardings products sold outside of the United States or Canada. Please confirm compatibility prior to placing an order or contact us for more information.
* Conditions may apply. Please visit our Refund Policy or contact us at info@es-performance.com
