The APR DTR6054 is a direct turbocharger replacement for the EA888 Gen 3 Engine. This upgrade includes matching software for various vehicles and mods, and provides up to 491 HP and 425 FT-LBS of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even Ethanol on the Golf R, S3 and TT S platform with fueling upgrades! For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own!
This is a brand new turbo designed and developed by APR from the ground up. It does not require a core, and there's no additional downtime associated with other upgrade styles. The turbo bolts to the factory location and connects to factory or upgraded components.
Since this turbo was designed from the ground up, and doesn't use any of the factory or factory cloned housings or internals, we had complete control over the design. We've upgraded the CHRA to feature German dual ceramic ball-bearings for smooth and reliable operation with better transient response. This also does away with the failure-prone journal bearing design on the factory turbochargers. Next the compressor cover was upgraded with an appropriate A/R matched to our larger billet aircraft-grade 6061 aluminum 60mm compressor wheel. We've also included a large turbo inlet pipe that perfectly matches the turbo's anti-surge compressor cover and connects directly to your factory or upgraded intake system. We've completely done away with the turbo muffler assembly providing the turbo with a larger outlet and smoother transition. The compressor cover even includes a port for a turbocharger shaft speed sensor should one suit your build.
The turbine side of the turbocharger also benefits from our ground-up design. The turbine housing is cast with 310 stainless steel that's designed to take the heat and abuse seen on a road course. The turbine A/R is perfectly matched to our new nickel-based superalloy K418 54mm turbine wheel. The system will see low exhaust gas temperature, low exhaust back pressure, low turbo discharge temperature, and low shaft speeds because the system has been properly designed from the ground up for the prescribed power levels. Of course, each rotating group is VSR balanced for reliable operation. This all lends well for customers who plan to use this turbo on a dedicated race car as it has the headroom necessary to push the system further on their own.
Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, t-bolt clamps, gaskets, o-rings, exhaust ring, exhaust v-band, exhaust manifold gasket, new studs, bolts, and washers, all new oil and coolant line o-rings, and our ECU Upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. This system has seen many road course track days and extensive testing to ensure longevity and reliability of the setup in the harshest of conditions. This setup does not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making it as safe on the stock engine as we can for these power levels. Go APR!
New DTR6054 direct turbocharger replacement designed by APR
Direct bolt-on to MQB platform EA888 gen 3 engines
Included software included produces up to 491 HP depending on platform and configuration
APR Low Pressure Fuel Pump Included
APR High Pressure Fuel Pump Included
APR Multi Port Injection Included
Plenty of turbocharger headroom for even more power in “race only” configurations
Over 30% compressor flow compared to the factory Golf R, S3, and TT S IS38 turbocharger
Included software remains emissions compliant and uses your factory exhaust
Included software designed for use on a factory engine (See notes)
Included software tested at various road courses
Various software levels depending on fueling modifications, including stock fueling
Supports 91, 93, 100, and 104 AKI in all configurations
Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only)
German dual ceramic ball bearing center section
Vibration sort rig (VSR) balanced turbocharger center housing rotating assembly (CHRA)
Excellent transient response
Aircraft-grade billet 6061 aluminum 60mm compressor wheel
Anti-surge compressor cover
Oversized cast turbo inlet pipe
Machined turbocharger speed sensor port with included billet block off plug
Perfectly matched compressor cover area over radius (A/R)
Silicone discharge hose with APR EZ-flow stepped lips included (No turbo muffler)
Integrated diverter valve (DV) port
Nickle-based superalloy K418 high-flow 54mm turbine wheel
High temperature 310 stainless steel turbine housing
Perfectly matched turbine A/R
All necessary hardware, gaskets, and clamps included
Connects to your factory components and reuses factory wastegate and DV
Incredible value with support and directions included
Please read before ordering. Eurosport Performance does not carry live inventory on this site. Most products are ordered for you directly from the manufacturer or our suppliers, and we follow their lead times. Placing an order confirms you have read and accepted the availability terms below.
| In stock
Ships within 24 to 48 hours
Products marked in stock are on our shelves in Montreal and leave within one to two business days.
|
Ordered for you
Most orders ship in 5 to 7 business days
Everything else is ordered from the manufacturer or supplier when you order. Delays can occur; if they do, we contact you.
|
|
Supplier lead times apply
If a product is not listed as in stock here and is on backorder at the manufacturer, it will most likely be on backorder for us too. We will tell you as soon as we know.
|
We keep you informed
You receive a confirmation when the order is placed, a notice if a delay comes up, and tracking the moment it ships.
|
Only products explicitly marked in stock are on our shelves. For everything else, the fastest way to know the current lead time is to ask us before you order; we check with the supplier and reply with a date.
Confirmed means we have placed the order with the manufacturer or supplier on your behalf. Shipping follows once the part reaches us or ships directly to you, usually within 5 to 7 business days for products that are available at the source.
We tell you as soon as the supplier confirms it, with the expected date when they give one. You can keep the order open, switch to an alternative we suggest, or cancel for a full refund before the part ships.
Yes. Any order that has not shipped can be cancelled by contacting us, and the refund goes back to your original payment method. Please contact us rather than opening a dispute with your bank: a cancellation takes us minutes, a chargeback takes weeks and freezes the refund in the meantime.
Sometimes. Larger or special-order items can ship to you directly from the supplier to save days in transit. You still receive tracking from us either way.
Orders ship from Montreal or directly from our suppliers. For Canadian addresses the price you pay is the price, with no import or duty fees added on delivery. See our shipping policy for details.
You get an email with the tracking number the moment the label is created, and you can follow the order in your account on the site or in the SPECD app.
Want a lead time before you order? Email us or use the contact page with the product name and your vehicle, and we will confirm availability with the supplier.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
|
Manufacturer terms apply
Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it.
|
We file the claim for you
Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted.
|
|
Fitment guarantee: North America only
We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering.
|
No warranty on tuning files
ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing.
|
|
Proof of purchase
Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app.
|
What is usually not covered
Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so.
|
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.
