034Motorsport Solid Rear Sway Bar, MkV/MkVI Volkswagen Golf/GTI/Jetta/GLI/Rabbit & 8J/8P Audi TT/A3 FWD, Adjustable

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the front-wheel drive MkV/MkVI Volkswagen Golf/GTI/Jetta/GLI/Rabbit & 8J/8P Audi TT/A3! The 034Motorsport Adjustable Solid Rear Sway Bar is made from high-quality spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering.

This product was tested thoroughly on the street and track on our shop MkVI development car before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on MkV/MkVI Volkswagen Golf/GTI/Jetta/GLI/Rabbit & 8J/8P Audi TT/A3 vehicles without compromising comfort on the street.

In addition, this 034Motorsport Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is needed or required. The addition of a stiffer front bar introduces even more push, requiring an even bigger bar in the back.  With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved.

034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.

Features:

• 215% - 290% Increased Sway Bar Rate (Over Stock MkVI GTI Rear Sway Bar)
• 25.4mm Diameter
• Solid Spring Steel Construction
• 2-Way Adjustable
• Designed to be used in conjunction with the stock front sway bar.
• Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
  • Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH).
  • Improves Sway Bar Response Speed
  • Extended Service Life
  • No Additional Lubricant Needed, and Should Not Be Added
  • Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
  • Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment
  • Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See
  • Limited Lifetime Warranty, Covering Manufacture Defects:
    • Material Cracking
    • Separation Of Teflon Liner and Polyurethane Bushing
    • Squeaking Under Normal (Street/Track) Conditions.

What's Included:

• 034Motorsport FWD MkV/MkVI Volkswagen & 8J/8P Audi Adjustable Solid Rear Sway Bar
• Teflon Lined Polyurethane Sway Bar Bushings
• High-Strength Billet Aluminum Sway Bar Brackets
• Installation Hardware & Grease

Please Note: We recommend runnning the latest revision of the factory rear end links, or upgrading to our Adjustable Spherical Rear End Links when using this sway bar on the "Stiff" setting.