Item available to order from the manufacturer
Please read our shipping policy and refund policy prior to ordering.
Eventuri's intake for the 8V Audi S3 2.0 TFSI: the most efficient, most direct airflow path to the turbo on this platform. The OEM airbox is replaced by Eventuri's patented carbon Venturi housing and a smooth carbon duct that keeps the flow laminar, and a laser-cut scoop in the front grille adds a true cold-air feed for the lowest possible inlet temperature.
The stock box is a cube — turbulence, drag on the turbo — and its duct, though it spans the grille, is only open on one side, facing the engine, so it mostly breathes warm bay air. With the hood closed the only direct cold-air path is a few small slots at the top of the grille. Eventuri's system fixes all three problems at once, and the result is a consistent, noticeable gain.
Performance gain+16–25 hp+15–22 ft-lb
HousingPatented Venturilaminar flow to the turbo
Cold-air feedGrille scoopdirect, sealed feed
ConstructionPre-preg carbonor full Kevlar
Dyno-tested on a Golf 7 R — the same EA888 engine as the 8V S3 — already running a remap, so stock airbox and Eventuri intake were compared with the same software, back to back on the same day, hood closed every run. The gain holds across the rev range rather than only at the peak.
Single vs. double duct. Eventuri built and tested both a single duct and an extended double duct spanning the grille. The double duct made no more power — it couldn't match the single duct, because the single design gives the smoothest, most direct path to the filter with the scoop sitting right in front of the opening and no chance for warm air to mix in, whereas the double duct forces air through a near-90° turn from the far side of the grille. The single duct is what ships.
Every component is engineered for a purpose and fabricated to the highest standard. Each kit includes:
| EVE-2TFSI-CF-INT | Audi 8V S3 2.0 TFSI intake, full black carbon |
|---|---|
| EVE-2TFSI-KV-INT | Audi 8V S3 2.0 TFSI intake, full Kevlar |
Fitment: Audi 8V S3 2.0 TFSI (EA888 Gen 3). Choose black carbon or Kevlar for the housing and duct; the duct is also available in plastic — ask us.
The housing combines a high-flow filter, aluminium cowl, laser-cut bracket and the carbon pod. The pod shrouds the reverse-mounted filter and smoothly shapes the airflow down to the intake tube; that gradual reduction in cross-section invokes the Venturi effect, accelerating the air while keeping it laminar — a large velocity stack rather than a cone filter with a heat shield. The duct channels cold air from the slam-panel opening to the filter, transitioning smoothly from the rectangular opening at the front to the round housing so the flow stays direct and undisturbed.
▶ Watch the video
▶ Watch the video
Ce site web n'offre pas d'inventaire en direct. Pour tout produit qui n'est pas en stock, le délai typique est de 5-7 jours ouvrables.
Les délais d'éxpédition peuvent varier selon la disponibilité du produit chez nos fournisseurs.
Si vous souhaitez avoir un approximatif du délai d'éxpédition, n'hésitez pas à nous contacter.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
Manufacturer terms apply Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it. | We file the claim for you Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted. |
Fitment guarantee: North America only We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering. | No warranty on tuning files ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing. |
Proof of purchase Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app. | What is usually not covered Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so. |
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.

