Aucun produit dans le chariot
Item available to order from the manufacturer
Please read our shipping policy and refund policy prior to ordering.
The JXB Weighted Short Shift Clamp is the cheapest big change you can make to a B8 or B8.5 Audi manual. Instead of replacing the shifter, it clamps to the bottom of the factory lever and extends it downward into the empty space under the console — the same geometry trick a short-throw kit uses, taken further than most kits can go because there's more room below the pivot than above it. Throw gets substantially shorter, the factory lever, knob and feel stay exactly as they were.
Then it adds mass where it counts. The clamp weighs 417 g, and because it sits below the pivot that's the equivalent of adding 260 g at the knob — more than a 380 g aftermarket knob actually gains you (most are sold by total mass, not mass added). The result is the heavy, deliberate, butter-smooth gate change people fit weighted knobs for, with no change to the knob you already like, and it stacks with one if you want more.
Part numberB8014A2JXB Performance
Added mass417 g≈ 260 g equivalent at the knob
ThrowSubstantially shorterlever extended below the pivot
InstallFrom the driver's seatno shifter removal
A conventional short-throw shifter shortens the top of the lever and lengthens the bottom a little. The clamp only works on the bottom — and there's far more room there — so the lever ratio changes more than a typical replacement shifter manages.
No new lever, no new knob, no new boot. Everything you touch is still OEM, which keeps the feel, the fit and the resale untouched. Remove the clamp and the car is stock again.
Mass below the pivot multiplies at the knob. 417 g down low gives the gate the momentum of a heavy knob without a heavy knob, and the shift stays smooth rather than notchy.
Add a weighted knob for even more inertia, or JXB's billet shifter mounting plate to take the slop out of the base. The clamp is the one that changes throw; the plate is the one that changes precision.
Done entirely from the driver's seat with the console trim out — no lifting the car, no transmission work. JXB's full-length video covers every shifter upgrade on the B8 in one session; for this part alone use the chapter marks:
| 4:01 | Console disassembly |
|---|---|
| 12:25 | Short Shift Clamp install |
| 19:47 | Linkage adjustment |
| 24:11 | Reassembly |
If you're not fitting the mounting plate, follow the throw-reduction sections and ignore the slop-reduction comparison.
Fits the B8 and B8.5 generation Audi A4, S4, A5, S5 and Q5 equipped with the 6-speed manual transmission. Not for S tronic / Tiptronic cars. Confirm your vehicle in the list above.
Ce site web n'offre pas d'inventaire en direct. Pour tout produit qui n'est pas en stock, le délai typique est de 5-7 jours ouvrables.
Les délais d'éxpédition peuvent varier selon la disponibilité du produit chez nos fournisseurs.
Si vous souhaitez avoir un approximatif du délai d'éxpédition, n'hésitez pas à nous contacter.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
Manufacturer terms apply Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it. | We file the claim for you Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted. |
Fitment guarantee: North America only We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering. | No warranty on tuning files ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing. |
Proof of purchase Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app. | What is usually not covered Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so. |
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.

