Item available to order from the manufacturer
Please read our shipping policy and refund policy prior to ordering.
Eventuri's GLC 63 S intake replaces both factory airboxes with sealed carbon units built to three objectives: more flow, low inlet temperatures and smooth air. Using every millimetre of the cramped engine bay, the new airboxes flow 39% more than stock on the flow bench (531 vs 381 CFM per side); staying fully sealed matters here because the M177's turbos sit right next to the intakes and the bay runs hot; and rounded panel filters with organically shaped housings mean no sharp corners between filter and turbo inlet, so the flow stays laminar and the turbos spool more efficiently.
Dyno tests were run with the hood closed, back to back, same day, on both a fully stock car and a stage 2 car (downpipes and remap) with only the airboxes changed: on the stage 2 car power rises linearly from 4,800 rpm, where the stock boxes become the restriction. A separate Insoric road-dyno test by CF Dynamics on the Autobahn, stage 1 tune, showed +31 hp and +39 Nm above 5,000 rpm.
Gain, stock+10–12 hp+12–15 ft-lb
Gain, stage 2+22–30 hp+20–24 ft-lb
Flow bench531 CFMvs 381 stock, per airbox
Post-filter height56 mmvs 23 mm stock (+143%)
Open-cone intakes dyno well with the hood up and lose it on the road: with the hood closed the turbo heat is trapped, the cones draw it in, the air is less dense and the turbos make less boost — and as the car accelerates they keep pulling the heat the engine and turbos generate under load. Eventuri tested the opposite way, hood closed throughout, and designed the system to be sealed from duct to turbo inlet.
The flow bench told the same story. On a Superflow SF-1020 at 28" H2O, an open-cone tubular intake flowed more than stock but less than Eventuri's sealed airbox, because its tube stays at the turbo-inlet diameter all the way to the cone while the Eventuri housing opens up in volume from the outlet to the filter. Their analogy: sucking through a straw versus a funnel.
The upper section narrows to 23 mm on the stock box; Eventuri's reaches 56 mm, with the MAP sensors moved to the back so the full volume above the filter is usable.
The ridged, convoluted stock inlet (43 mm) becomes a smooth 74 mm entry — about 84% more cross-sectional area.
Bespoke, double-layer ISO 5011 non-woven mesh, dry (no oil near the sensors), with a rounded profile instead of 90-degree corners to keep the flow path turbulence-free.
Carbon tolerances aren't tight enough to seal a panel filter, so each filter sits in a black-anodised flange machined from a single aluminium billet.
CNC holders carry the factory rubber bushes, so the airboxes mount exactly where the originals did.
Lids, bases and inlet transitions in pre-preg carbon for heat insulation and a smooth internal surface.
| EVE-GLC63S-CF-INT | Mercedes GLC 63 S carbon intake system |
|---|
Please read before ordering. Eurosport Performance does not carry live inventory on this site. Most products are ordered for you directly from the manufacturer or our suppliers, and we follow their lead times. Placing an order confirms you have read and accepted the availability terms below.
| In stock
Ships within 24 to 48 hours
Products marked in stock are on our shelves in Montreal and leave within one to two business days.
|
Ordered for you
Most orders ship in 5 to 7 business days
Everything else is ordered from the manufacturer or supplier when you order. Delays can occur; if they do, we contact you.
|
|
Supplier lead times apply
If a product is not listed as in stock here and is on backorder at the manufacturer, it will most likely be on backorder for us too. We will tell you as soon as we know.
|
We keep you informed
You receive a confirmation when the order is placed, a notice if a delay comes up, and tracking the moment it ships.
|
Only products explicitly marked in stock are on our shelves. For everything else, the fastest way to know the current lead time is to ask us before you order; we check with the supplier and reply with a date.
Confirmed means we have placed the order with the manufacturer or supplier on your behalf. Shipping follows once the part reaches us or ships directly to you, usually within 5 to 7 business days for products that are available at the source.
We tell you as soon as the supplier confirms it, with the expected date when they give one. You can keep the order open, switch to an alternative we suggest, or cancel for a full refund before the part ships.
Yes. Any order that has not shipped can be cancelled by contacting us, and the refund goes back to your original payment method. Please contact us rather than opening a dispute with your bank: a cancellation takes us minutes, a chargeback takes weeks and freezes the refund in the meantime.
Sometimes. Larger or special-order items can ship to you directly from the supplier to save days in transit. You still receive tracking from us either way.
Orders ship from Montreal or directly from our suppliers. For Canadian addresses the price you pay is the price, with no import or duty fees added on delivery. See our shipping policy for details.
You get an email with the tracking number the moment the label is created, and you can follow the order in your account on the site or in the SPECD app.
Want a lead time before you order? Email us or use the contact page with the product name and your vehicle, and we will confirm availability with the supplier.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
|
Manufacturer terms apply
Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it.
|
We file the claim for you
Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted.
|
|
Fitment guarantee: North America only
We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering.
|
No warranty on tuning files
ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing.
|
|
Proof of purchase
Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app.
|
What is usually not covered
Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so.
|
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.

