Currently on back order
Please read our shipping policy and refund policy prior to ordering.
The 2026+ CF Moto Z10's factory turbocharged induction system relies on OEM plastic piping that was engineered around cost targets, not performance. Under sustained boost pressure and elevated under-hood temperatures, that plastic piping is a liability — it expands, distorts, and over time becomes a source of boost leaks and inconsistent throttle response. The stock blow off valve compounds the problem, venting pressure in a manner that's calibrated for factory detuned output, not for an enthusiast pushing the Z10 harder than the engineers intended.
TGK Motorsport's CF Moto Z10 Blow Off Valve Conversion eliminates both weak points in a single bolt-on install. A precision-welded aluminum pipe replaces the OEM plastic unit entirely, delivering a thermally stable, structurally rigid charge path that holds its geometry at full boost. Paired with a full Turbosmart 50mm EM Raceport blow off valve — one of the most trusted names in forced induction venting — this kit gives the Z10 a properly sized, performance-spec BOV that responds instantly, seals decisively, and sounds exactly how a turbocharged machine should.
| Part number | TGK-0302-04-01 |
|---|---|
| Compatible vehicles | 2026+ CF Moto Z10 (Turbocharged) |
| Material | Welded aluminum pipe |
| BOV included | Turbosmart 50mm EM Raceport Blow Off Valve (full unit) |
| Hardware included | Yes |
| Warranty | Lifetime structural warranty |
Engineered as a drop-in swap for the factory induction components on the 2026+ CF Moto Z10 — no cutting, no fabrication, no guesswork. Every bracket point and port location mirrors the OEM geometry for a stress-free install.
The factory plastic pipe flexes under pressure and degrades with heat cycles. The TGK welded aluminum pipe holds its shape at any boost level and operating temperature, locking in consistent airflow geometry and eliminating a known failure point on the Z10's forced induction system.
The included Turbosmart EM Raceport is a full 50mm atmospheric blow off valve — not a recirculation unit, not an adapter, not an afterthought. It vents charge pressure completely on throttle lift, protecting the turbo, reducing compressor surge, and delivering the signature Raceport sound enthusiasts actually want to hear.
The Turbosmart Raceport's 50mm piston responds and reseals faster than any factory-spec valve. This rapid actuation prevents compressor surge between gear changes and hard throttle lifts, extending turbo service life and keeping boost delivery crisp and consistent lap after lap.
Every fastener, clamp, and fitting needed to complete the installation is included in the box. Nothing is left to source separately. Install time is measured in minutes, not hours.
TGK Motorsport backs the aluminum pipe with a lifetime structural warranty. We build components to outlast the vehicle they're installed on — this kit is no exception.
Yes. The Turbosmart 50mm EM Raceport is an atmospheric blow off valve, meaning it vents boost pressure to atmosphere rather than recirculating it. On a factory tune this is compatible with the Z10's engine management — the ECU accounts for the pressure drop on throttle lift. If you're running a custom tune or aggressive fueling map, consult your tuner, but for the vast majority of Z10 owners running stock or mild modifications, no tune changes are required.
The OEM plastic pipe is adequate at factory boost levels and moderate temperatures, but it's a compromised component. Plastic expands differently than aluminum under heat cycling, which can cause microscopic distortion at clamp interfaces and contribute to boost leaks over time. For street use it may hold up, but for any sustained performance driving — track days, aggressive canyon runs, or modified output levels — the aluminum pipe is a meaningful upgrade that eliminates a known weak point before it becomes a problem.
The OEM BOV on the CF Moto Z10 is sized and spring-rated for stock boost pressure and factory power levels. The Turbosmart 50mm EM Raceport has a significantly larger 50mm piston diameter, faster valve actuation, and a proven piston-style design that seals more decisively under high-boost conditions. It also vents fully to atmosphere, eliminating recirculated hot air from the charge path on throttle lift. The result is sharper throttle response, better compressor surge protection, and noticeably improved boost recovery.
This kit is designed as a direct OEM replacement, so fitment is straightforward for anyone comfortable with basic hand tools and engine bay work. All hardware is included. A competent home mechanic can complete the install in under an hour. If you're unfamiliar with turbocharged induction systems or aren't comfortable working around boost clamps and vacuum lines, having a shop perform the install is always a valid option — but it is not required.
Everything is included. The TGK Motorsport CF Moto Z10 Blow Off Valve Conversion ships with the welded aluminum pipe, the full Turbosmart 50mm EM Raceport BOV, and all required hardware. There are no additional parts to source. This is a complete, ready-to-install system — not a pipe-only kit that requires a separately purchased valve.
Please read before ordering. Eurosport Performance does not carry live inventory on this site. Most products are ordered for you directly from the manufacturer or our suppliers, and we follow their lead times. Placing an order confirms you have read and accepted the availability terms below.
| In stock
Ships within 24 to 48 hours
Products marked in stock are on our shelves in Montreal and leave within one to two business days.
|
Ordered for you
Most orders ship in 5 to 7 business days
Everything else is ordered from the manufacturer or supplier when you order. Delays can occur; if they do, we contact you.
|
|
Supplier lead times apply
If a product is not listed as in stock here and is on backorder at the manufacturer, it will most likely be on backorder for us too. We will tell you as soon as we know.
|
We keep you informed
You receive a confirmation when the order is placed, a notice if a delay comes up, and tracking the moment it ships.
|
Only products explicitly marked in stock are on our shelves. For everything else, the fastest way to know the current lead time is to ask us before you order; we check with the supplier and reply with a date.
Confirmed means we have placed the order with the manufacturer or supplier on your behalf. Shipping follows once the part reaches us or ships directly to you, usually within 5 to 7 business days for products that are available at the source.
We tell you as soon as the supplier confirms it, with the expected date when they give one. You can keep the order open, switch to an alternative we suggest, or cancel for a full refund before the part ships.
Yes. Any order that has not shipped can be cancelled by contacting us, and the refund goes back to your original payment method. Please contact us rather than opening a dispute with your bank: a cancellation takes us minutes, a chargeback takes weeks and freezes the refund in the meantime.
Sometimes. Larger or special-order items can ship to you directly from the supplier to save days in transit. You still receive tracking from us either way.
Orders ship from Montreal or directly from our suppliers. For Canadian addresses the price you pay is the price, with no import or duty fees added on delivery. See our shipping policy for details.
You get an email with the tracking number the moment the label is created, and you can follow the order in your account on the site or in the SPECD app.
Want a lead time before you order? Email us or use the contact page with the product name and your vehicle, and we will confirm availability with the supplier.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
|
Manufacturer terms apply
Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it.
|
We file the claim for you
Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted.
|
|
Fitment guarantee: North America only
We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering.
|
No warranty on tuning files
ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing.
|
|
Proof of purchase
Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app.
|
What is usually not covered
Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so.
|
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.

