No Products in the Cart
4 units available within our supplier network
Please read our shipping policy and refund policy prior to ordering.
Virtually every top professional engine builder runs ARP head studs on their competition engines, and the reason is simple: there isn't a better stud on the market. ARP starts with premium 8740 chrome-moly alloy rated beyond "aircraft" grade, heat-treats every stud to 200,000 psi, centerless-grinds it concentric and only then rolls the threads — the expensive way, and the one that gives ten times the fatigue strength of a stud threaded before heat-treat.
Material8740 chrome-molyrated above aircraft grade Tensile strength200,000 psiPro Series studs and bolts ThreadsRolled after heat-treat≈ 10× the fatigue life StandardZero defect, zero failureARP stamped on every studEach stud is placed vertically in a rack and heat-treated individually so the heat penetrates completely — not dumped in a basket by the hundred. After heat-treat it's centerless ground in about ten light passes until it's as close to perfectly straight and concentric as a part can be; lesser studs skip this step entirely and are simply thread-rolled from bar stock. The payoff shows up on the bench: gaskets and cylinder heads glide into position perfectly aligned instead of being fought over the studs.
On many engines ARP undercuts the shorter studs so their "stretch" matches the longer ones. That equalizes clamping force across the head and compensates for head-gasket compression once the heads are torqued — the single biggest factor in keeping a gasket sealed under boost.
Cold-forged for molecular integrity, heat-treated before thread rolling and machining, rated at a nominal 200,000 psi. Application-specific kits designed for competition components. Reduced-hex or 12-point heads with a wide flange, so the heads can be re-torqued without pulling the valvetrain and larger valve springs clear the fastener. Hardened, parallel-ground washers included for even load and accurate torque readings; most kits have undercut short bolts.
Head bolts rated at 180,000 psi — 15 % stronger than Grade 8 — with the same reduced-hex or 12-point flanged head that lets you re-torque in place. Every kit comes complete with hardened parallel-ground washers. The right choice for a strong street or track engine on factory-style components.
For most builds ARP recommends studs. A stud goes in finger-tight — never jammed with a nut — so when the nut is torqued the stud stretches on its vertical axis only, giving more accurate and consistent clamping. A bolt is being twisted and stretched at the same time while it's torqued, reacting to two forces at once. Studs also make assembly faster, with the head and gasket held in perfect alignment — something a race engine that gets serviced often will appreciate.
Bolts earn their place on street cars where a brake master cylinder or other hardware intrudes into the engine bay: with bolts the cylinder head can come off with the engine still in the car. Either way, because the head gasket compresses on first torque, re-torque studs and bolts after the engine has been run.
ARP head stud and bolt kits are engine-specific. Select your vehicle above or check the vehicle list to confirm this kit matches your engine code, block and cylinder head; the kit number on the part is the final reference. Contact us if you're building with aftermarket heads or a sleeved block.
Please read before ordering. Eurosport Performance does not carry live inventory on this site. Most products are ordered for you directly from the manufacturer or our suppliers, and we follow their lead times. Placing an order confirms you have read and accepted the availability terms below.
| In stock
Ships within 24 to 48 hours
Products marked in stock are on our shelves in Montreal and leave within one to two business days.
|
Ordered for you
Most orders ship in 5 to 7 business days
Everything else is ordered from the manufacturer or supplier when you order. Delays can occur; if they do, we contact you.
|
|
Supplier lead times apply
If a product is not listed as in stock here and is on backorder at the manufacturer, it will most likely be on backorder for us too. We will tell you as soon as we know.
|
We keep you informed
You receive a confirmation when the order is placed, a notice if a delay comes up, and tracking the moment it ships.
|
Only products explicitly marked in stock are on our shelves. For everything else, the fastest way to know the current lead time is to ask us before you order; we check with the supplier and reply with a date.
Confirmed means we have placed the order with the manufacturer or supplier on your behalf. Shipping follows once the part reaches us or ships directly to you, usually within 5 to 7 business days for products that are available at the source.
We tell you as soon as the supplier confirms it, with the expected date when they give one. You can keep the order open, switch to an alternative we suggest, or cancel for a full refund before the part ships.
Yes. Any order that has not shipped can be cancelled by contacting us, and the refund goes back to your original payment method. Please contact us rather than opening a dispute with your bank: a cancellation takes us minutes, a chargeback takes weeks and freezes the refund in the meantime.
Sometimes. Larger or special-order items can ship to you directly from the supplier to save days in transit. You still receive tracking from us either way.
Orders ship from Montreal or directly from our suppliers. For Canadian addresses the price you pay is the price, with no import or duty fees added on delivery. See our shipping policy for details.
You get an email with the tracking number the moment the label is created, and you can follow the order in your account on the site or in the SPECD app.
Want a lead time before you order? Email us or use the contact page with the product name and your vehicle, and we will confirm availability with the supplier.
Products are warrantied by their manufacturer. Eurosport Performance is an authorized reseller: every part we sell is covered by the manufacturer's own warranty, with its own terms and duration. Claims go through us, so you deal with Eurosport Performance rather than a form on the brand's site, but whether a claim is accepted is the manufacturer's decision.
|
Manufacturer terms apply
Duration and coverage are set by the brand and differ from one to the next: some cover one year, some a lifetime, some only the original purchaser. The brand's warranty page is the reference; ask us if you cannot find it.
|
We file the claim for you
Contact us with your order number, photos and a description of the issue. We open the claim with the manufacturer, follow it up, and arrange the repair, replacement or credit they approve. The manufacturer decides whether the claim is accepted.
|
|
Fitment guarantee: North America only
We guarantee fitment for vehicles sold in the North American market. Vehicles from other markets are out of scope; specifications differ, and it is the customer's responsibility to confirm compatibility before ordering.
|
No warranty on tuning files
ECU and TCU tunes and other software files are sold without warranty and are not returnable once delivered or flashed. Tuning can affect your vehicle's factory warranty; please read the brand's terms before purchasing.
|
|
Proof of purchase
Your Eurosport Performance order is the proof of purchase every manufacturer asks for. Keep the order confirmation; it is also in your account on the site and in the SPECD app.
|
What is usually not covered
Damage from improper installation, modification, abuse, racing or an incorrect application for the vehicle, and normal wear items such as pads, clutch discs and filters. Shipping and labour are covered only when the manufacturer's terms say so.
|
It is the manufacturer's warranty for that product. Where the brand publishes it, we note it in the description; otherwise contact us before ordering and we will confirm the exact terms with them.
Stop using it if it is a safety-related part, then contact us with your order number, clear photos, and when and how the issue appeared. Do not return anything until we confirm the claim; manufacturers often require an inspection or an authorization number first.
The manufacturer. We prepare and submit the claim, provide the proof of purchase and push for a fair outcome, but acceptance, replacement or credit is their call under their terms. We pass their decision on to you as soon as we have it.
It depends on the manufacturer. Simple cases are approved in days; claims that need the part inspected can take a few weeks. We keep you updated at each step and push when it drags.
No. Tuning files are software; once delivered or flashed they cannot be returned, and they carry no warranty from Eurosport Performance or, in most cases, from the tuner. Support for the tune itself (revisions, flashing questions) comes from the tuning brand under its own terms.
No. Our fitment guarantee covers vehicles sold in the North American market only. European, Japanese and other market vehicles can differ in engines, electronics and dimensions, and a part listed for the North American model is not guaranteed to fit. If you order for one of these vehicles, confirming compatibility is your responsibility, and fitment issues on such vehicles are not covered by returns or warranty.
Labour is not covered unless the manufacturer's terms specifically include it. Having the part installed by a qualified shop protects your claim: improper installation is the most common reason a manufacturer declines.
No. Returns cover unused parts you no longer want, under our refund policy. Warranty covers a part that fails in use, under the manufacturer's terms. If you are unsure which applies, contact us and we will point you to the right one; please do not open a bank dispute, as it pauses both processes.
Questions about coverage before you buy? Email us with the product and your vehicle and we will confirm the manufacturer's terms.

